hvps www.vishay.com vishay dale thin film revision: 02-nov-15 1 document number: 60091 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high value, high voltage preci sion sip thin film resistor, through hole network schematic features ? high nominal precision resistors (value range 50k to 10m) ? highly accurate resistance tolerance (up to 0.01 %) ? conformal coating flame resistant (ul 94 v-0) rating ? ultra low tcr ( 5 ppm/c) ? high voltage ? flame resistant (ul 94 v-0 rating) ? hvps2 voltage rating up to 1800 v ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 note * this datasheet provides information about parts that are rohs-compliant and / or parts th at are non-rohs-compliant. for example, parts with lead (pb) te rminations are not rohs-compliant. please see the information / tables in this datasheet for details. applications ? precise instrumentation (medical, test etc.) ? precision amplifiers note (1) see chart 12 available available standard electrical specifications test specifications conditions material passivated nichrome - pin/lead number 2- resistance range 50 000 to 5000 k (hvps1) - 100 000 to 10 000 k (hvps2) tcr: absolute 5 ppm/c to 25 ppm/c -55 c to +125 c tcr: tracking -- tolerance: absolute 0.01 % to 1.0 % maximum at +70 c tolerance: ratio -- power rating: resistor 125 mw (hvps1) - 400 mw (hvps2) power rating : package -- stability: absolute r 0.05 % 2000 h at +70 c stability: ratio -- voltage coefficient < 1.0 ppm/v - working voltage 250 v (hvps1) - up to 1800 v (hvps2) (1) operating temperature range -55 c to +125 c - storage temperature range -- noise < - 30 db - thermal emf < 0.1 v/c - shelf life stability: absolute r 0.01 % 1 year at +25 c shelf life stability: ratio --
hvps www.vishay.com vishay dale thin film revision: 02-nov-15 2 document number: 60091 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 hvps2 max. applied voltage at 0.400 w versus resistance value hvps2 voltage rating by value working voltage resistance range 200 100k to 400k 400 401k to 900k 600 901k to 1.6m 800 1.6m to 2.5m 1000 2.5m to 3.6m 1200 3.6m to 4.9m 1400 4.9m to 6.4m 1600 6.4m to 8.1m 1800 8.1m to 10m dimensions and imprinting in inches (millimeters) resistance value in m applied voltage in kv 2 0 0.8 0.6 0.4 0.2 1.8 1.6 1.4 1.2 1 0.1 10.1 3.1 2.1 1.1 4.1 5.1 6.1 7.1 8.1 9.1 part no: datecode 0.02 0.005 (0.508 0.127) 0.100 typ. (2.54) 0.125 min. (3.175) 0.260 max. (6.604) 0.110 max. (2.794) 0.240 max. (6.096) 0.010 (0.25) part no: datecode 0.200 typ. (5.08) 0.02 0.005 (0.508 0.127) 0.125 min. (3.175) 0.110 max. (2.794) 0.260 max. (6.604) 0.320 max. (8.128) 0.010 (0.25) hvps1 hvps2
hvps www.vishay.com vishay dale thin film revision: 02-nov-15 3 document number: 60091 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mechanical specifications resistive element passivated nichrome substrate material alumina body epoxy coated terminals copper alloy tin/lead option sn60 - sn63 lead (pb)-free option sn96.5, ag3.0, cu0.5 tin/lead and lead (pb)-free finish hot solder dip global part number information new global part nu mbering: hvps1e1003quf global model (3 or 4 digits) tcr resistance tolerance packaging hvps1 hvps2 (tin lead) hvps1s hvps2s (lead (pb)-free) (e1) e = 25 ppm/c d = 15 ppm/c y = 10 ppm/c z = 5 ppm/c first 3 digits are significant figures. last digit specifies the number of zeros to follow. a = 0.05 % b = 0.1 % d = 0.5 % f = 1.0 % q = 0.02 % t = 0.01 % uf = tubed e.g.: 1001 = 1k 1002 = 10k 1005 = 10m historical part number example: hvps1e5004b (for reference purposes only) hvps1 e 5004 b series tcr characteristics resistance tolerance vps2 y20 s h 3tu 0 f vps1 e10 h 3qu 0 f
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
